To Find Coins with a Classic 5-Id, you have to Turn on the unit with turning the sensitivity knob clockwise to the “P,” or preset, setting. After that, set the disc rotary knob at the “P” setting in the coin range. Then, Scan the target area using techniques described in the owner’s manual. You need to Sweep the detecting loop slowly from side to side while walking forward. You must keep the loop level with the ground.
When searching a wide area, you should scan it at least twice in perpendicular directions. Next, rely initially on beeps in the headphones rather than the machine’s display to find coins. After finding a clear and steady tone, you can check the display to see the unit’s prediction of what the metal is. Forth, pinpoint the exact location to dig with holding down the “All Metal” toggle in the temporary position and passing over the target.