To Make a Glass Cabochon Pendant, you have to select and cut out an image that is 1-by-1-inch in size. After that, Squeeze a thin coat of clear-drying adhesive made for glass onto the back of a glass tile. Then, Place the image face down onto the back of the tile. You need to press firmly to remove any air bubbles in the adhesive. You must Set the tile aside and allow it to dry completely.
Next, trim any overhang of the image from your tile with an X-acto knife. Forth, squeeze a thin coat of clear-drying adhesive around the edges of the back of the tile. You should spread the adhesive with using a toothpick from the edges to the middle of the tile. You can remove any large air bubbles in the adhesive using your toothpick to pop them or push them toward the edges of the tile. After that, Place the glass tile face down beneath a small cup in order to keep dust from gathering on the wet adhesive while it dries overnight.
Then, attach the bail to the tile with squeezing a tiny amount of jewelry adhesive to the bail and pressing it firmly onto the back of the tile. You have to let the adhesive to dry completely. Last, thread the glass cabochon pendant on a chain to use as a necklace.