To Make a Pipe for Smoking Tobacco, you have to think about the design of your pipe. After that, Use a sharp carving knife and a block of carving material. You need to Work around the block of wood to shape the bowl of the pipe to your satisfaction. When you have cut the basic outer shape of your bowl, you must use a combination of carving knife and hand reamer to remove wood to form the inside of your pipe bowl. Then, Cut the stem of the pipe from the same block of wood as you did the bowl.
You should Turn the stem around and approach it from the other end. If you want a curved stem, you can soak the stem in water for a day or two so that it is soft enough to bend and let it dry. Next, Use rough sandpaper to polish the bowl and stem until they are extremely smooth. You have to finish them with wood varnish, stain and a clear lacquer. You need to fit the end of the stem over the notched end of the tail on the bowl.