To Make Chunky Glass Windows, you have to Number and color each glass section on the printed design template using the marker. After that, lay the first sheet of colored glass over the template. You need to Use the glass cutter to trace and cut each section of that color from the sheet glass. You must Number each cut section according to the design template using the marker. Then, Repeat cutting process for each color of sheet glass so that all window sections have been cut and numbered.
Next, lay out the glass sections on top of the design template by number to resemble the completed window. Forth, Cut and stretch came strips to fit around the perimeter of the window. You should Frame the entirety of the glass sections in the came. After that, cut and bend the came to fit between the first and second segments. You can repeat cutting and bending process for came between each section of the design.
You have to Fit the pieces together snugly like a puzzle. Then, Solder the adjacent came pieces to one another to construct framing around each of the glass sections. Using the bristle brush, you need to rub concrete putty over the front and back surfaces of the window to seal between the came and glass sections. Next, pour whiting over the concrete putty to ease the removal of excess putty. Forth, Use a rag to rub in the whiting on the surface of the window.
You must gently remove the excess putty. After that, Use the spatula to scrape away any excess putty left at the edges of the came. You should wipe the window clean with a wet rag.