To Make Glass Bottles into a Hanging Chandelier, you have to turn a wagon wheel onto its side, so that the wheel is flat on the working surface. You need to arrange the glass bottles on top of the wheel until the bottles are standing upright on the wheel’s rim. You must Mix and match the bottles so that you come up with a chandelier arrangement that you like. If you are using assorted bottles, you should mix in some smaller sized bottles with taller ones. After that, apply strong glass glue to the bottom of the glass bottles.

You can affix the glass bottles firmly into position on the wagon wheel with pressing them down. You have to hold them in place for a few seconds. You need to wait overnight for the glue to dry. Then, Measure and cut one foot of 24 gauge wire for every bottle that you use on the chandelier. Next, wrap one end of the 1-foot wire around the bottom of the glass bottle.

You must make multiple turns around the bottle with the wire so that the wire meets the wheel. You should wrap the wire around the wheel’s rim at least three times. Forth, make a knot at the end of the wire with needle-nose pliers. After that, insert battery-operated taper candles into the glass bottles. Then, Drill two holes into two opposite sides of the wagon wheel with an electric drill.

You can make the holes on the inside of the wheel rim. Next, cut the chain that you will use to hang the chandelier with chain cutters. If you buy the chain from a hardware store, you have to ask a professional to cut it for you at the desired length. Forth, Place one end of the chain opening directly over the hole that you drilled on one side of the wagon wheel. You need to Use the electric drill to drill an eyebolt into the hole.

You must repeat the same process with the other end of the chain on the other hole that was drilled. After that, Use a ladder to reach the ceiling. You should Drill holes into the ceiling with the electric drill. You can Drill the appropriate number of holes that are necessary for affixing the ceiling anchor. You have to ensure the ceiling anchor has a hook.

Then, Vacuum the holes that you create with the electric drill. Next, Place each anchor over its corresponding hole in the ceiling until the hook is facing down. You need to Use the electric drill to screw in the nuts and bolts that will hold the anchor in place. You must mount the middle of the chain into the anchor hook to hang the chandelier from the ceiling.