To Metal Coat an Animal Skull for a European Mount, you have to Measure out equal parts by volume of casting resin part A, part B and bronze powder. After that, Mix the bronze powder with casting part B. you need to Constant stirring will be needed to prevent the bronze powder from settling. Then, Mix part A of the casting resin to the mixture. Next, Brush the mixture onto the skull. You can hold the skull by the antlers.
You must continue to brush the resin on until the entire skull is covered. You should continue brushing and rotating the skull around to avoid the formation of resin pools. If any resin gets on the antlers, you can wipe them clean with a wet rag. Forth, Continue brushing until the resin hardens to the point of being unchanged by the brushing. You have to hang the skull from its antlers to dry for twenty four hours.
Last, Rub the skull’s finish with the fine steel wool after it has hardened to smooth out any lines left by the brush strokes.