To Photograph Jewelry with using a Light Box, you have to Place your light box in a moderately lit room, away from direct light. You need to arrange your jewelry inside of it. You must prop the piece up on a piece of neutral colored fabric at between a 30 as well as 45 degree angle. After that, Place small spotlights on tripods on either side of the light box. You should Point the spotlights at the walls of the light box and turn them on.
Then, arrange your camera on a tripod a foot away from the box. You can turn off the camera’s flash. You have to turn on the macro setting. Next, look through the camera’s eyehole or check its display. You need to ensure that the view of the jewelry piece is the view you want.
If your camera is too far away, you must move it closer. You should adjust the display if you are dissatisfied with its appearance. If a frontal view of the piece does not look good, you can try a three-quarters view. You have to ensure your camera is focused on the display. Forth, Set your camera’s timer or use a camera remote to take the picture.
After that, take lots of photos. You need to take photos from different angles.