To Use a Zig-Zag Cigarette Roller, you have to Place your cigarette roller in front of you so that the adjustable bar faces you. You need to Move the bar to the open position on the track. After that, Place a filter tip between the bars off to one side. You must snug it up against the side of the roller. Then, Fill the remaining length of the roller with tobacco.
You should push the tobacco down between the bars with your finger. Next, push the adjustable bar to the closed position by pushing it towards the other bar. Forth, Use both hands to roll both bars towards yourself about three times to pack the tobacco into a cylindrical shape. After that, Pull a rolling paper out of the package and hold it so the glue strip is at the top of the paper and facing you. Then, Insert the bottom edge of the rolling paper into the crack between the two bars until it will not push in any further.
Next, roll both bars toward you again. You can keep rolling the bars toward you until the glue strip is all that is left sticking out of the top of the roller. Forth, lick the glue strip to moisten it and roll the bars toward you three or four more times to seal your cigarette. Last, pull the adjustable bar towards you to open the roller.